A B C D E F G H I K L M N O P R S T V W

S

scanMatrix() - Method in class de.wagner_ibw.iow.smx.SwitchMatrix

scanPorts() - Method in class de.wagner_ibw.iow.Iow56

scanPorts() - Method in class de.wagner_ibw.iow.Iow40

scanPorts() - Method in class de.wagner_ibw.iow.Iow24

scanPorts() - Method in class de.wagner_ibw.iow.AbstractIowDevice

Gets the current pin status.

SD20 - class de.wagner_ibw.iow.i2c.SD20.

This is the implementation of the SD20 device "Servocontroller" by Jörg Pohl (www.roboter-teile.de))

SD20() - Constructor for class de.wagner_ibw.iow.i2c.SD20

Constructor

setAnalogueInputProgramming(int) - Method in class de.wagner_ibw.iow.i2c.PCF8591

setAnalogueOutputValue(int) - Method in class de.wagner_ibw.iow.i2c.PCF8591

setBit(int) - Method in class de.wagner_ibw.iow.IowPort

Sets the given bit to 1 (set).

setBit(int, int) - Method in class de.wagner_ibw.iow.AbstractIowDevice

Set the given bit from the given port.

setCGRAMAddr(int) - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setCGRAMAddr(int) - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setCGRAMAddr(int) - Method in class de.wagner_ibw.iow.lcd.HD44780

Set DDRAM address Parameters: Address - DDRAM address

setCGRAMAddr(int) - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setConfiguration(int, int) - Method in class de.wagner_ibw.iow.i2c.LM75

setCursor(int, int) - Method in class de.wagner_ibw.iow.lcd.M50530Pio

OK Moves cursor to new Position.

setCursor(int, int) - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setCursor(int, int) - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setCursor(int, int) - Method in class de.wagner_ibw.iow.lcd.HD44780

OK Moves cursor to new Position.

setCursor(int, int) - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setCursor(int, int) - Method in class de.wagner_ibw.iow.lcd.DoubleHD44780Ahw

setCursor(int, int) - Method in class de.wagner_ibw.iow.lcd.AbstractLCD

Moves cursor to new Position.

setCursorDispOn() - Method in class de.wagner_ibw.iow.lcd.M50530Pio

setCursorDispOn() - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setCursorDispOn() - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setCursorDispOn() - Method in class de.wagner_ibw.iow.lcd.HD44780

Convenient method: Turn LCD display on.

setCursorDispOn() - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setCursorDispOn() - Method in class de.wagner_ibw.iow.lcd.DoubleHD44780Ahw

setCursorDispOn() - Method in class de.wagner_ibw.iow.lcd.AbstractLCD

Convenient method: Turn LCD display on.

setCursorHome() - Method in class de.wagner_ibw.iow.lcd.M50530Pio

setCursorHome() - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setCursorHome() - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setCursorHome() - Method in class de.wagner_ibw.iow.lcd.HD44780

setCursorHome() - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setCursorHome() - Method in class de.wagner_ibw.iow.lcd.DoubleHD44780Ahw

setCursorHome() - Method in class de.wagner_ibw.iow.lcd.AbstractLCD

Sets DDRAM address 0 in address counter.

setCursorleft() - Method in class de.wagner_ibw.iow.lcd.M50530Pio

setCursorleft() - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setCursorleft() - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setCursorleft() - Method in class de.wagner_ibw.iow.lcd.HD44780

Move LCD cursor to the left

setCursorleft() - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setCursorleft() - Method in class de.wagner_ibw.iow.lcd.AbstractLCD

Move LCD cursor to the left

setCursorOff() - Method in class de.wagner_ibw.iow.lcd.M50530Pio

setCursorOff() - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setCursorOff() - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setCursorOff() - Method in class de.wagner_ibw.iow.lcd.HD44780

OK Convenient method: Turn LCD cursor off.

setCursorOff() - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setCursorOff() - Method in class de.wagner_ibw.iow.lcd.DoubleHD44780Ahw

setCursorOff() - Method in class de.wagner_ibw.iow.lcd.AbstractLCD

Convenient method: Turn LCD cursor off.

setCursorOn() - Method in class de.wagner_ibw.iow.lcd.M50530Pio

setCursorOn() - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setCursorOn() - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setCursorOn() - Method in class de.wagner_ibw.iow.lcd.HD44780

OK Convenient method: Turn LCD cursor on.

setCursorOn() - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setCursorOn() - Method in class de.wagner_ibw.iow.lcd.DoubleHD44780Ahw

setCursorOn() - Method in class de.wagner_ibw.iow.lcd.AbstractLCD

Convenient method: Turn LCD cursor on.

setCursorRight() - Method in class de.wagner_ibw.iow.lcd.M50530Pio

setCursorRight() - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setCursorRight() - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setCursorRight() - Method in class de.wagner_ibw.iow.lcd.HD44780

Move LCD cursor to the right

setCursorRight() - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setCursorRight() - Method in class de.wagner_ibw.iow.lcd.AbstractLCD

Move LCD cursor to the right

setData(int) - Method in class de.wagner_ibw.iow.IowPort

Sets the entire port's dtat to the given integer value.

setData(String) - Method in class de.wagner_ibw.iow.IowPort

Sets the entire port's data to the given String value.

setDataFromRead(int) - Method in class de.wagner_ibw.iow.IowPort

Sets the port's data register after read report received.

setDDRAMAddr(int) - Method in class de.wagner_ibw.iow.lcd.M50530Pio

setDDRAMAddr(int) - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setDDRAMAddr(int) - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setDDRAMAddr(int) - Method in class de.wagner_ibw.iow.lcd.HD44780

Set DDRAM address Parameters: Address - DDRAM address

setDDRAMAddr(int) - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setDirection(int) - Method in class de.wagner_ibw.iow.IowPort

Sets the direction for the port's pins (io mask as int).

setDirection(int, int) - Method in class de.wagner_ibw.iow.AbstractIowDevice

Set the direction mask to the given port.

setDirection(String) - Method in class de.wagner_ibw.iow.IowPort

Sets the direction for the port's pins (io mask as String).

setDisplayControl(boolean, boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.M50530Pio

setDisplayControl(boolean, boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setDisplayControl(boolean, boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setDisplayControl(boolean, boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.HD44780

setDisplayControl(boolean, boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setDisplayControl(boolean, boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.DoubleHD44780Ahw

setDisplayControl(boolean, boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.AbstractLCD

Sets ON/OFF of all display (dispOn), cursor ON/OFF (cursorOn), and blink of cursor position character (cursorBlink).

setDispOff() - Method in class de.wagner_ibw.iow.lcd.M50530Pio

setDispOff() - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setDispOff() - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setDispOff() - Method in class de.wagner_ibw.iow.lcd.HD44780

OK Convenient method: Turn LCD display off.

setDispOff() - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setDispOff() - Method in class de.wagner_ibw.iow.lcd.DoubleHD44780Ahw

setDispOff() - Method in class de.wagner_ibw.iow.lcd.AbstractLCD

Convenient method: Turn LCD display off.

setEntryMode(boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.M50530Pio

setEntryMode(boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setEntryMode(boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setEntryMode(boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.HD44780

setEntryMode(boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setEntryMode(boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.DoubleHD44780Ahw

setEntryMode(boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.AbstractLCD

Sets cursor move direction and specifies display shift.

setIowDevice(AbstractIowDevice) - Method in interface de.wagner_ibw.iow.spi.SPIDevice

Sets the reference to an IO-Warrior device for write report operations.

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.spi.SPI

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.spi.AbstractSPIDevice

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.smx.SwitchMatrix

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.lcd.M50530Pio

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.lcd.HD44780

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.lcd.DoubleHD44780Ahw

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.lcd.AbstractLCD

setIowDevice(AbstractIowDevice) - Method in interface de.wagner_ibw.iow.SpecialModeFunction

Sets the reference to the underlying iow device for write report operations.

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.i2c.SD20

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.i2c.PCF8591

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.i2c.PCF8574A

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.i2c.PCF8570

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.i2c.LM75

setIowDevice(AbstractIowDevice) - Method in interface de.wagner_ibw.iow.i2c.I2CDevice

Sets the reference to an IO-Warrior device for write report operations.

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.i2c.I2C

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.i2c.DS1803

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.i2c.AT24C128

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.i2c.AbstractI2CDevice

setIowDevice(AbstractIowDevice) - Method in class de.wagner_ibw.iow.rc5.RC5

setKeyMap(String[][]) - Method in class de.wagner_ibw.iow.smx.SwitchMatrixKeyMap

setMonitor(Monitor) - Method in class de.wagner_ibw.iow.i2c.AbstractI2CDevice

Sets the reference to an i2c transaction monitor.

setPort(int, int) - Method in class de.wagner_ibw.iow.AbstractIowDevice

Set the pattern to the given port.

setShiftControl(boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.M50530Pio

setShiftControl(boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setShiftControl(boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setShiftControl(boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.HD44780

setShiftControl(boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setShiftControl(boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.DoubleHD44780Ahw

setShiftControl(boolean, boolean) - Method in class de.wagner_ibw.iow.lcd.AbstractLCD

Moves cursor and shifts display whitout changing DDRAM contents.

setSpecial(int) - Method in class de.wagner_ibw.iow.IowPort

Setter for special bit mask.

setSpecialChar(int, int[]) - Method in class de.wagner_ibw.iow.lcd.M50530Pio

setSpecialChar(int, int[]) - Method in class de.wagner_ibw.iow.lcd.LCD16x21

setSpecialChar(int, int[]) - Method in class de.wagner_ibw.iow.lcd.LCD16x16Pio

setSpecialChar(int, int[]) - Method in class de.wagner_ibw.iow.lcd.HD44780

setSpecialChar(int, int[]) - Method in class de.wagner_ibw.iow.lcd.GLCD128x128

setSpecialChar(int, int[]) - Method in class de.wagner_ibw.iow.lcd.DoubleHD44780Ahw

setSpecialChar(int, int[]) - Method in class de.wagner_ibw.iow.lcd.AbstractLCD

Sets a special char in CGRAM.

setSPIDevice(AbstractSPIDevice) - Method in class de.wagner_ibw.iow.spi.SPI

Adds the spi device implementation (e.g. an instance of M95020.java).

setTHyst(double) - Method in class de.wagner_ibw.iow.i2c.LM75

Sets THYST set point in this LM75.

setTimeout(long) - Method in class de.wagner_ibw.iow.AbstractIowDevice

Set timeout for read operations.

setTOs(double) - Method in class de.wagner_ibw.iow.i2c.LM75

Sets TOS set point in this LM75.

setWriteTimeout(long) - Method in class de.wagner_ibw.iow.AbstractIowDevice

Set timeout for write operations.

SimpleIoTest - class de.wagner_ibw.test.SimpleIoTest.

SimpleIoTest() - Constructor for class de.wagner_ibw.test.SimpleIoTest

Constructor for stand-alone operation.

SimpleIoTest(IowFactory) - Constructor for class de.wagner_ibw.test.SimpleIoTest

Constructor for use as part of an application (independent thread).

SimpleSwitchMatrixExample - class de.wagner_ibw.examples.SimpleSwitchMatrixExample.

It is a simple example program for the switch matrix special mode function.

SimpleSwitchMatrixExample() - Constructor for class de.wagner_ibw.examples.SimpleSwitchMatrixExample

SimpleSwitchMatrixExample(IowFactory) - Constructor for class de.wagner_ibw.examples.SimpleSwitchMatrixExample

SMF_CPS_ID - Static variable in interface de.wagner_ibw.iow.SpecialModeFunction

Special mode function id for current pin status special mode function.

SMF_I2C_ID - Static variable in interface de.wagner_ibw.iow.SpecialModeFunction

Special mode function id for I2C special mode function.

SMF_LCD_ID - Static variable in interface de.wagner_ibw.iow.SpecialModeFunction

Special mode function id for LCD special mode function.

SMF_LED_ID - Static variable in interface de.wagner_ibw.iow.SpecialModeFunction

Special mode function id for Led Matrix special mode function.

SMF_RC5_ID - Static variable in interface de.wagner_ibw.iow.SpecialModeFunction

Special mode function id for RC5 special mode function.

SMF_SMX_ID - Static variable in interface de.wagner_ibw.iow.SpecialModeFunction

Special mode function id for Switch Matrix (SMX) special mode function.

SMF_SPI_ID - Static variable in interface de.wagner_ibw.iow.SpecialModeFunction

Special mode function id for SPI special mode function.

SpecialModeFunction - interface de.wagner_ibw.iow.SpecialModeFunction.

Interface for special mode function implementations.

SPI - class de.wagner_ibw.iow.spi.SPI.

Implementation of the SPI special mode function.

SPI(int) - Constructor for class de.wagner_ibw.iow.spi.SPI

Constructor for IO-Warrior 24.

SPI(int, int) - Constructor for class de.wagner_ibw.iow.spi.SPI

Constructor for IO-Warrior 56.

SPIDevice - interface de.wagner_ibw.iow.spi.SPIDevice.

Each SPI device implementation must implements this interface.

switchAoff() - Method in class de.wagner_ibw.examples.RFSwitch

switchAon() - Method in class de.wagner_ibw.examples.RFSwitch

switchBoff() - Method in class de.wagner_ibw.examples.RFSwitch

switchBon() - Method in class de.wagner_ibw.examples.RFSwitch

switchCoff() - Method in class de.wagner_ibw.examples.RFSwitch

switchCon() - Method in class de.wagner_ibw.examples.RFSwitch

SwitchMatrix - class de.wagner_ibw.iow.smx.SwitchMatrix.

This is the implementation of the IO Warrior key matrix special mode function.

SwitchMatrix() - Constructor for class de.wagner_ibw.iow.smx.SwitchMatrix

Constructor

SwitchMatrixChangeListener - interface de.wagner_ibw.iow.smx.SwitchMatrixChangeListener.

This Interface contains the call back methods for the switch matrix change listener.

SwitchMatrixEvent - class de.wagner_ibw.iow.smx.SwitchMatrixEvent.

This class represents a single switch matrix event, received by an IO-Warrior.

SwitchMatrixEvent(int[], int[]) - Constructor for class de.wagner_ibw.iow.smx.SwitchMatrixEvent

SwitchMatrixExample - class de.wagner_ibw.examples.SwitchMatrixExample.

It is a simple example program for the switch matrix.

SwitchMatrixExample() - Constructor for class de.wagner_ibw.examples.SwitchMatrixExample

SwitchMatrixExample(IowFactory) - Constructor for class de.wagner_ibw.examples.SwitchMatrixExample

SwitchMatrixKeyMap - class de.wagner_ibw.iow.smx.SwitchMatrixKeyMap.

It is a simple example program for the switch matrix.

SwitchMatrixKeyMap(String[][]) - Constructor for class de.wagner_ibw.iow.smx.SwitchMatrixKeyMap